News - EcuTun.pl https://ecutun.pl/category/news/ Profesjonalna modyfikacja oprogramowania sterowników Fri, 26 Apr 2024 20:38:10 +0000 en-US hourly 1 PRINTOUT OF RESULTS FOR PARTNERS https://ecutun.pl/en/printout-of-results-for-partners-2/ Fri, 26 Apr 2024 18:49:15 +0000 https://ecutun.pl/?p=45026 At the request of clients, the site has added the ability to print a page with all possible options without site details. There are currently two printing options. The first one contains the site details, the second one is completely blank. To print the tuning results without website details, you need to use the printout […]

Сообщение PRINTOUT OF RESULTS FOR PARTNERS появились сначала на EcuTun.pl.

]]> At the request of clients, the site has added the ability to print a page with all possible options without site details. There are currently two printing options.
The first one contains the site details, the second one is completely blank. To print the tuning results without website details, you need to use the printout for partners, point 2 in the photo.

As a result, you will receive a page on which you can put your company stamp or add details in another way. This allows you to provide clients with advertising information with the necessary details.
Enjoy your work.

 

Сообщение PRINTOUT OF RESULTS FOR PARTNERS появились сначала на EcuTun.pl.

]]> OBD solution for Marelli 9DF HW002 https://ecutun.pl/en/obd-solution-for-marelli-9df-hw002/ Fri, 10 Nov 2023 19:20:44 +0000 https://ecutun.pl/?p=44894 OBD solution for Marelli 9DF HW002 Version 6.42.0.0 of Flex out now   Program in OBD and OBD on Bench Marelli 9DF ECUs with hardware version HW002. The new Flex update (vers. 6.42.0.0) is out now, allowing you to read Internal Flash and External EEPROM memories, download the virtual read of our database and write the full content of the Internal Flash memory. Change parameters of Multijet […]

Сообщение OBD solution for Marelli 9DF HW002 появились сначала на EcuTun.pl.

]]> OBD solution for Marelli 9DF HW002

Version 6.42.0.0 of Flex out now

 

Program in OBD and OBD on Bench Marelli 9DF ECUs with hardware version HW002.

The new Flex update (vers. 6.42.0.0) is out now, allowing you to read Internal Flash and External EEPROM memories, download the virtual read of our database and write the full content of the Internal Flash memory.

Change parameters of Multijet engines with last generation (HW002) 9DF Marelli ECUs: you will be able to program in OBD directly from the vehicle* or in OBD on Bench mode, thus exploiting the connection via the ECU connector.

*Please note that for real read and ECU writing from the diagnostic port, it is necessary to bypass the SGW module.

 

Some of the supported vehicles:

  • Fiat 500L 1.3L Multijet 95PS (2018)
  • Fiat 500X 1.3L Multijet 95PS (2020)
  • Fiat Ducato 2.3L Multijet 140PS (2020)
  • Fiat Tipo 1.3L Multijet 95PS (2019)

 

This new protocol is available for the following software packages:
OBD

  • FLS0.1M – SW Flex ECU (car, van, bike) OBD/Bench Master
  • FLS0.1S – SW Flex ECU (car, van, bike) OBD/Bench Slave
  • FLS0.5M – SW Flex Full Master
  • FLS0.5S – SW Flex Full Slave

 

Newly added protocols:
(OBD)

  • FCA Marelli 9DF HW002 Read/Virtual Read/Write/Checksum Calculation Internal Flash, Read External EEPROM, Read Full Backup

Writing Time: ~ 3 minutes and 30 seconds

 

Bug Fix

  • Added new CRC type for Ford MPS6
  • CRC fix for FCA Marelli MM10JA
  • CRC fix for VAG Continental Simos18.1

 

Software improvements

  •  Improved writing procedure on Vag Bosch MDG1 OBD

 

Click here to discover the full list of supported vehicles.

Сообщение OBD solution for Marelli 9DF HW002 появились сначала на EcuTun.pl.

]]> Boot solutions for Delphi DCM2.7AP, DELPHI DCM3.7 VAG, DELPHI DCM7.1AP, DELPHI DCM7.24 https://ecutun.pl/en/44816/ Thu, 13 Jul 2023 04:58:14 +0000 https://ecutun.pl/?p=44816 New Boot solutions for Delphi on heavy-duty vehicles and automobiles Flex version 6.31.0.0 out now   New Flex update to program in Boot mode Delphi ECUs installed on JCB, Landini Tractors, McCormick heavy vehicles and on Kia, Hyundai, Mahindra, Volkswagen, Seat, Skoda, Great Wall automobiles.   Four new ECUs are supported as of today: Delphi DCM2.7AP Delphi DCM3.7 VAG Delphi DCM7.1AP Delphi DCM7.24   Thanks to these protocols, it is possible to […]

Сообщение Boot solutions for Delphi DCM2.7AP, DELPHI DCM3.7 VAG, DELPHI DCM7.1AP, DELPHI DCM7.24 появились сначала на EcuTun.pl.

]]> New Boot solutions for Delphi on heavy-duty vehicles and automobiles

Flex version 6.31.0.0 out now

 

New Flex update to program in Boot mode Delphi ECUs installed on JCB, Landini Tractors, McCormick heavy vehicles and on Kia, Hyundai, Mahindra, Volkswagen, Seat, Skoda, Great Wall automobiles.

 

Four new ECUs are supported as of today:

  • Delphi DCM2.7AP
  • Delphi DCM3.7 VAG
  • Delphi DCM7.1AP
  • Delphi DCM7.24

 

Thanks to these protocols, it is possible to read and write the whole content of Flash and EEPROM memories and to restore the Delphi DCM3.7 VAG ECU in case of wrong OBD writing. Restoring will be possible by contacting the tech support.

 

Some of the supported vehicles:

  • Hyundai i20 1.5L CRDi 100PS
  • Great Wall Poer 2.0L Wingle 7 140PS
  • Kia Seltos 1.5L CRDi 115PS
  • JCB Wheel Loaders 2.5L 75PS
  • JCB Telehandler 4.4L 75PS
  • Landini Tractors Rex3 2.5L 55PS
  • Mahindra Xuv 1.5L 115PS
  • Seat Ibiza 1.2L TDI 75PS
  • Skoda Fabia 1.2L TDI 75PS
  • VW Polo 1.2 TDI 75Ps

 

This new protocol is available for the following software packages:
DCM2.7AP – Boot

  • FLS0.4M – SW Flex Boot Nexus MPC5xxx Master
  • FLS0.4S – SW Flex Boot Nexus MPC5xxx Slave
  • FLS0.5M – SW Flex Full Master
  • FLS0.5S – SW Flex Full Slave

DCM3.7 VAG – Boot

  • FLS0.5M – SW Flex Full Master
  • FLS0.5S – SW Flex Full Slave
  • FLS0.6M – SW Flex OBD/Bench/Boot Renesas SH7xxxx Master
  • FLS0.6S – SW Flex OBD/Bench/Boot Renesas SH7xxxx Slave

DCM7.1AP – Boot

  • FLS0.5M – SW Flex Full Master
  • FLS0.5S – SW Flex Full Slave
  • FLS0.10M – SW Flex Bench/Boot Infineon TC17xx / TC2xx / TC3xx Master
  • FLS0.10S – SW Flex Bench/Boot Infineon TC17xx / TC2xx / TC3xx Slave

DCM7.24 – Boot

  • FLS0.5M – SW Flex Full Master
  • FLS0.5S – SW Flex Full Slave
  • FLS0.10M – SW Flex Bench/Boot Infineon TC17xx / TC2xx / TC3xx Master
  • FLS0.10S – SW Flex Bench/Boot Infineon TC17xx / TC2xx / TC3xx Slave

 

Newly added protocols:
(Boot)

  • Mahindra Delphi DCM2.7AP MPC5642 Read/Write/Checksum Calculation Internal Flash

Reading Time: ~ 1.40 minutes  Writing Time: ~ 1.20 minutes

  • JCB Delphi DCM2.7AP MPC5643 / MPC5644 Read/Write/Checksum Calculation Internal Flash

Reading Time:~ 1.40 minutes  Writing Time:~ 1.20 minutes

  • VAG Delphi DCM3.7 SH72513 Read Full Backup, Write Recovery

Reading Time: ~ 15 seconds Writing Time: ~ 5 seconds

  • All Delphi DCM7.1AP  TC277 Read/Write/Checksum Calculation Internal Flash, Read/Write/Checksum Calculation Internal EEPROM, Full Backup

Reading Time:~ 1.20 minutes  Writing Time: ~ 20 seconds

  • JCB Delphi DCM7.24  TC277 Read/Write/Checksum Calculation Internal Flash, Read/Write/Checksum Calculation Internal EEPROM, Full Backup

Reading Time: ~ 1.20 minutes  Writing Time: ~ 20 seconds

  • JCB Delphi DCM7.24  TC297 Read/Write/Checksum Calculation Internal Flash, Read/Write/Checksum Calculation Internal EEPROM, Full Backup

Reading Time: ~ 1.20 minutes  Writing Time: ~ 20 seconds

 

Bug fixes:

  • Added new CRC type for VAG Bosch MG1CS011
  • Added new CRC type for VAG Continental Simos8.2
  • Added new CRC type for Mercedes Continental MCM / ACM
  • Added new CRC type for Land Rover Denso
  • Added new CRC type for Ford Delphi MPC555
  • Porsche Continental SDIx OBD – fixed issue which needed throttle reset
  • BMW Exx Series OBD – fixed writing which cause OBD bricking for some SW versions

 

Software improvements:

  • Improved Autodetection System in MCM / ACM protocols

 

Click here to discover the full list of supported vehicles.

Сообщение Boot solutions for Delphi DCM2.7AP, DELPHI DCM3.7 VAG, DELPHI DCM7.1AP, DELPHI DCM7.24 появились сначала на EcuTun.pl.

]]> OBD Full and Bench solution for Continental ACM2.1 and ACM2.2 https://ecutun.pl/en/obd-full-and-bench-solution-for-continental-acm2-1-and-acm2-2/ Tue, 30 May 2023 13:20:01 +0000 https://ecutun.pl/?p=40533 Flex version 6.28.0.0 out now   From now on you can program AdBlue Continental ACM2.1 and ACM2.2 ECUs in OBD Full and Bench without the need to open the unit. New Flex update for Mercedes trucks and buses. No patch is used for programming with these new protocols, thus ensuring your vehicle’s warranty to remain valid. You just need to write the original […]

Сообщение OBD Full and Bench solution for Continental ACM2.1 and ACM2.2 появились сначала на EcuTun.pl.

]]> Flex version 6.28.0.0 out now

 

From now on you can program AdBlue Continental ACM2.1 and ACM2.2 ECUs in OBD Full and Bench without the need to open the unit.

New Flex update for Mercedes trucks and buses.

No patch is used for programming with these new protocols, thus ensuring your vehicle’s warranty to remain valid. You just need to write the original full backup of ECUs to bring them back to their original state.

 

New ECUs added to Flex vehicle list:

  • ACM2.1 D1
  • ACM2.1 D2
  • ACM2.1 D3
  • ACM2.1 D3 (protected with password)
  • ACM2.1 D4
  • ACM2.2 D2

 

Some of the supported vehicles:

  • Mercedes Truck Actros 1851 12.8L OM471LA 510HP
  • Mercedes Truck Arocs 1843 10.7L OM470 428HP
  • Mercedes Truck Antos 2532 7.7L OM936 315HP
  • Mercedes Bus Citaro C2 10.7L OM470 394HP
  • Mercedes Bus Tourismo RHD 12.8L OM471LA 428HP
  • Setra S515 HDH 12.8L OM471LA 470HP
  • Freightliner Cascadia DD15 14.8L Detroit DD15 530HP

 

The new protocol is available for the following software packages:
OBD Full

  • FLS0.1M – SW Flex ECU (car, van, bike) OBD/Bench Master
  • FLS0.1S – SW Flex ECU (car, van, bike) OBD/Bench Slave
  • FLS0.5M – Flex Full SW Package Master
  • FLS0.5S – Flex Full SW Package Slave

To program ACM2.1 and ACM2.2 in OBD Full you need to purchase the FLX2.65 cable on www.magicmotorsport.shop or via ticket

 

Bench

  • FLS0.1M – SW Flex ECU (car, van, bike) OBD/Bench Master
  • FLS0.1S – SW Flex ECU (car, van, bike) OBD/Bench Slave
  • FLS0.5M – Flex Full SW Package Master
  • FLS0.5S – Flex Full SW Package Slave
  • FLS0.10M – SW Flex Boot Infineon TC17xx / TC2xx Master
  • FLS0.10S – SW Flex Boot Infineon TC17xx / TC2xx Slave

 

Newly added protocols:
(OBD Full)

  • Mercedes Trucks/Bus Continental ACM2.1 D1 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
  • Mercedes Trucks/Bus Continental ACM2.1 D2 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
  • Mercedes Trucks/Bus Continental ACM2.1 D3 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
  • Mercedes Trucks/Bus Continental ACM2.1 D3 (PW protected) TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
  • Mercedes Trucks/Bus Continental ACM2.1 D4 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
  • Mercedes Trucks/Bus Continental ACM2.2 D2 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup

Read time: ~ 1.30 minutes  Write time: ~ 2 minutes

(Bench)

  • Mercedes Trucks/Bus Continental ACM2.1 D1 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
  • Mercedes Trucks/Bus Continental ACM2.1 D2 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
  • Mercedes Trucks/Bus Continental ACM2.1 D3 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
  • Mercedes Trucks/Bus Continental ACM2.1 D3 (PW protected) TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
  • Mercedes Trucks/Bus Continental ACM2.1 D4 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup
  • Mercedes Trucks/Bus Continental ACM2.2 D2 TC1796 Read/Write/Checksum Calculation Internal Flash, Read/Write Internal EEPROM, Read/Write External EEPROM, Full Backup

Read time: ~ 1.30 minutes  Write time: ~ 2 minutes

 

Bug fixes:

  • Fixed connection error with some versions of VAG Simos10.xx
  • Add new HW version supported of Marelli 11GF
  • Support added for new kind of checksum on Continental MCM and ACM
  • Fixed CRC calculation on Marelli10JA

 

Software improvements:

  • Added support for Melco E6T8008x MH8115
  • Add support for Subaru Denso 112800 SH72531
  • Updated protocol ACM2.1 (3520002) from Bench to Boot, in order to support also ACM2.1 D3 (PW protected) and D4

 

Click here to discover the full list of supported vehicles.

Сообщение OBD Full and Bench solution for Continental ACM2.1 and ACM2.2 появились сначала на EcuTun.pl.

]]>